Author Index

A

  • Abdollahian, Mohammad Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]
  • Afshari, Ebrahim A study on performance of different cooling flow fields with parallel channels in polymer electrolyte membrane fuel cell [Volume 4, Issue 3, 2014, Pages 109-121]
  • Afshari, Ebrahim Comparison of PEM Fuel Cell Performance with Metal Foam and Parallel Channel as Flow-Field Gas Distributor [Volume 4, Issue 3, 2014, Pages 123-136]
  • Ahmadi, A. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]
  • Ahmadi Brooghani, S.Y Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Ahsani Tehrani, Hojjat A new method for the stability of discrete-time two-dimensional systems defined by the Roesser model [Volume 4, Issue 2, 2014, Pages 67-74]
  • Alahdadian, A.A. Prediction of Forming Limit Diagram for Ti-64 titanium alloy sheet using finite element simulation [Volume 4, Issue 4, 2015, Pages 23-32]
  • Alavi Nia, Ali Experimental and numerical investigations of effects of section geometry and metallic foam filler on deformation and energy absorption characteristics of thin-walled tubes [Volume 4, Issue 1, 2014, Pages 51-63]
  • Amini, Ramin Using isogeometric method for dam break modeling by Lagrangian approach. [Volume 4, Issue 3, 2014, Pages 45-55]
  • Arab, Ali Asghar Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]
  • Ashrafizadeh, Ali Development and Evaluation of two Hybrid Shape Design Algorithms in Fluid Mechanics [Volume 4, Issue 4, 2015, Pages 1-12]

B

  • Bagheri, Morteza Optimization of shells with laminated stiffeners for minimum weight and maximum buckling load [Volume 4, Issue 1, 2014, Pages 37-49]
  • Bagherian, M Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Bahadori, R Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Bahmaie, B Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]

D

  • Dadvand, A. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Daei, Maryam The Formation Of Optimal Null Basis Vectors For The Force Method Analysis Of Finite Element Models Comprising Tetrahedron Elements Using Ant Colony Algorithm [Volume 4, Issue 3, 2014, Pages 1-9]
  • Delouei, A. Amiri Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]

E

  • Ebrahimnia-Bajestan, Ehsan On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]

F

  • Farshad, Ali Experimental and numerical investigations of effects of section geometry and metallic foam filler on deformation and energy absorption characteristics of thin-walled tubes [Volume 4, Issue 1, 2014, Pages 51-63]
  • Fateh, Mohammad Mehdi Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]
  • Fateh, Mohammad Mehdi Robust control of robotic manipulators using an adaptive neural network estimator of uncertainty [Volume 4, Issue 2, 2014, Pages 1-12]
  • Fateh, Mohammad Mehdi Impedance adaptive control of an active suspension system [Volume 4, Issue 3, 2014, Pages 11-21]
  • Fateh, Mohammad Mehdi Model-Free Control for a Vehicle Hydraulic Suspension System [Volume 4, Issue 4, 2015, Pages 13-21]

G

  • Ghadamyari, E. Use of short-time Fourier transform in vibration analysis of helicopter main rotor [Volume 4, Issue 4, 2015, Pages 101-112]
  • Ghaderi, Seyed Hadi Mechanical properties of carbon nanotubes form a generalized modified molecular structural mechanics model [Volume 4, Issue 4, 2015, Pages 75-85]
  • Ghaffari, A Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Ghannad Kahtoei, Mehdi Displacements and Stresses in Rotating FGM Pressurized Thick Hollow cylindrical Shells Based on HSDT [Volume 4, Issue 1, 2014, Pages 65-78]
  • Gharooni, Hamed Displacements and Stresses in Rotating FGM Pressurized Thick Hollow cylindrical Shells Based on HSDT [Volume 4, Issue 1, 2014, Pages 65-78]
  • Ghorbanpour Arani, Ali Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]

H

  • Hadian Jazi, Shahram Use of short-time Fourier transform in vibration analysis of helicopter main rotor [Volume 4, Issue 4, 2015, Pages 101-112]
  • Haji Aboutalebi, F. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]
  • Hasanpour, K. Prediction of Forming Limit Diagram for Ti-64 titanium alloy sheet using finite element simulation [Volume 4, Issue 4, 2015, Pages 23-32]
  • Hoseini, ٍEhsan Impedance adaptive control of an active suspension system [Volume 4, Issue 3, 2014, Pages 11-21]

J

  • Jaffari, Mohhamad Determination of optimum parameters effect on stress distribution in orthotropic plates with quasi-square cut out using genetic algorithm [Volume 4, Issue 4, 2015, Pages 87-99]
  • Janghorbani Ghaheh, Vali Allah The Formation Of Optimal Null Basis Vectors For The Force Method Analysis Of Finite Element Models Comprising Tetrahedron Elements Using Ant Colony Algorithm [Volume 4, Issue 3, 2014, Pages 1-9]
  • Javabvar, Daruosh Exprimental investigation of effect of material temperature and die profile on mechanical and metallurgical properties of 6061 Aluminum Alloy in Forward Thixoextrusion process [Volume 4, Issue 2, 2014, Pages 53-65]
  • Joodaki, Ali Development and Evaluation of two Hybrid Shape Design Algorithms in Fluid Mechanics [Volume 4, Issue 4, 2015, Pages 1-12]

K

  • Kalteh, Mohammad Performance evaluation of conventional and sloped solar chimney power plants in different climates of Iran [Volume 4, Issue 3, 2014, Pages 137-146]
  • Kamran, M Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]
  • Kayhani, M.H. Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]
  • Keramat, A. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]
  • Khalili, Kh Experimental study of crack during ceramic drying and compare with the finite element [Volume 4, Issue 1, 2014, Pages 119-129]
  • Kharati-Koopaee, Masoud Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Khazaee, M Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Khooban, M. H Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Kolahchi, Reza Buckling of an embedded piezoelectric nanobeam based on strain gradient and Reddy beam theories [Volume 4, Issue 3, 2014, Pages 23-33]

L

  • Lashkarara, B. Waterhammer caused by intermittent and simultaneously pump failure in pipe systems including series pump groups [Volume 4, Issue 4, 2015, Pages 207-221]

M

  • Mahmoudi, Mussa Evaluation of the Vertical Vibration Period Uue to Column Elimination and Its Effects on Structural Response Due to Progressive Collapse [Volume 4, Issue 3, 2014, Pages 35-43]
  • Majidi, S. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]
  • Mirshojaeian Hosseini, M.J Analysis and examination of the factors contributing to rapidness of response time in non-linear model of electro-hydrostatic actuator [Volume 4, Issue 1, 2014, Pages 11-23]
  • Mirzaee, I. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Moradi, Sh Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]
  • Mostafapour, K Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]

N

  • Nasrollahzadeh, Kourosh Prediction of compressive strength of FRP-confined concrete square columns using fuzzy logic approach [Volume 4, Issue 4, 2015, Pages 45-64]
  • Nayeb, H Presenting an analytical relation to determine frequency and mode shape of stepped hinged beam resting on elastic foundation [Volume 4, Issue 3, 2014, Pages 57-64]
  • Nayebi, H Presenting an analytical relation to determine frequency and mode shape of stepped hinged beam resting on elastic foundation [Volume 4, Issue 3, 2014, Pages 57-64]
  • Nazari, M Changing the dynamics of a system by using finite duration inputs: Application to cancer modeling and treatment [Volume 4, Issue 1, 2014, Pages 79-91]
  • Nazari, M روش شبکه‌بولتزمن حرارتی مرتبه دوم در انتقال حرارت جابه¬جایی آزاد در محفظه¬های غیرمربعی [Volume 4, Issue 3, 2014, Pages 147-158]
  • Nazari, M. Applying ‘SHARP’ Interface Scheme in the Immersed Boundary–Lattice Boltzmann Method [Volume 4, Issue 4, 2015, Pages 157-174]
  • Niazmand, hamid On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]
  • Nouhi, Ehsan Prediction of compressive strength of FRP-confined concrete square columns using fuzzy logic approach [Volume 4, Issue 4, 2015, Pages 45-64]
  • Nouri, N.M Design of Six-Component Force/Moment Sensor For Cavitation Tunnel [Volume 4, Issue 1, 2014, Pages 131-137]

O

  • Ozgoli, Sajad Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]

P

  • Pirkandi, Jamasb Comparison of PEM Fuel Cell Performance with Metal Foam and Parallel Channel as Flow-Field Gas Distributor [Volume 4, Issue 3, 2014, Pages 123-136]
  • Pourmoayed, Alireza The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Poursina, M. Shape Optimization of Preform Dies in two-stage Near Net Forging [Volume 4, Issue 4, 2015, Pages 65-73]

R

  • Raeisy, Behrooz Six Degree of Freedom Simulation of Variable Mass Autonomous Underwater Vehicle [Volume 4, Issue 4, 2015, Pages 33-44]
  • Rahmani, R. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Rahmati, R. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]
  • Ramezani, Amin Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]
  • Raoufi, M. On the Effect of Blood Flow and Oxygen Mass Transfer on Development of Atherosclerosis [Volume 4, Issue 2, 2014, Pages 119-132]
  • Rezaeepazhand, jalil Effect of external electrorheological damper on dynamic buckling behavior of a metallic plate [Volume 4, Issue 1, 2014, Pages 25-36]
  • Rohani, A. Determination of optimum parameters effect on stress distribution in orthotropic plates with quasi-square cut out using genetic algorithm [Volume 4, Issue 4, 2015, Pages 87-99]

S

  • Saghafian, Mohsen Numerical simulation of laminar flow and heat transfer from rotating circular cylinder confined in a channel [Volume 4, Issue 3, 2014, Pages 65-81]
  • Sakaki, A. Model-Free Control for a Vehicle Hydraulic Suspension System [Volume 4, Issue 4, 2015, Pages 13-21]
  • Shariati, Zahra A study on performance of different cooling flow fields with parallel channels in polymer electrolyte membrane fuel cell [Volume 4, Issue 3, 2014, Pages 109-121]
  • Shayan, E. Numerical simulation of incompressible viscous external flow using mesh-free lattice Boltzmann method [Volume 4, Issue 4, 2015, Pages 175-189]
  • Shishehsaz, M Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]

V

  • Valipoure, M.S. The Effects of Magnetic Field on The Convective Heat Transfer Around a Solid Cylinder Wrapped by a Porous Sheath [Volume 4, Issue 4, 2015, Pages 191-205]

Y

  • Yaghoubi, S Transient Stress Analysis In Adhesive Single Lap Joints of a Composite Material Due To Fiber Breakage [Volume 4, Issue 4, 2015, Pages 113-126]
  • Yarahmadi, M Wavelet Sliding-Mode Control with Varying Boundary Layer via Time-Variant Sliding Function for Pitch Autopilot [Volume 4, Issue 1, 2014, Pages 93-106]
  • Yazdan parast, seyed m.r Design and Implement of Fuzzy control of a Robotic Camera for Target Tracking [Volume 4, Issue 1, 2014, Pages 1-10]

Z

  • Zahmatkesh, Iman Entropy Generation of Nanofluids during Natural Convection in Rectangular Porous Enclosures [Volume 4, Issue 3, 2014, Pages 171-184]
  • Zeinaly, Zahra Time-varying delay compensation by communication disturbance observer for teleoperation system by considering model uncertainty [Volume 4, Issue 4, 2015, Pages 143-156]
  • Z. Moghaddam, naser Using isogeometric method for dam break modeling by Lagrangian approach. [Volume 4, Issue 3, 2014, Pages 45-55]